Well it’s still not available for Windows users officially, but what you can do is follow these instructions from Kinetic-X and NightCrow then load the pre-built custom firmware image. You will have to download a custom image. Find the appropriate “custom image” off the “custom image” section here.
Step 1: Use WinPWN 2.0.0.3 or later To PWN your 2.0 iPhone. If you need any help on this step, follow my winpwn 2.0 guide here. If you need to unlock, do so in this step. The update to 2.0.1 will not update your baseband.
Step 2: Grab a pre-created IPSW Made with PWNAGE 2.0.2 Mac. If you dont have one made you can grab one here off my firmware links in custom section.
Step 3:Put your phone into recovery or DFU mode. Note that some users report DFU works best while others are reporting normal recovery mode works best. If you have an error, try swapping modes and toggle between these two types of recovery until one works.
Step 4: In iTunes Shif+Click the Restore button and find your custom IPSW Firmware file.
Step 5: Wait for it to complete! ENJOY!
1. Kenyth July 20th, 2008, 12:44 am
THANKS ALOT!
[Reply]
iPhone4World.com Reply:
July 20th, 2008 at 5:49 am
thx alot
[Reply]
kinetic-x Reply:
July 20th, 2008 at 10:25 am
No problem. I hope this helps everyone.
[Reply]
Brian Reply:
July 22nd, 2008 at 9:29 am
Hi Kinetic-X,
Just want to say thank you to all of your guys for all the hard work.
I have successfully done the upgrade as per your instructions and everything seems to work. I have one issue and I’m not sure how to resolve it. Under settings - network the tab to setup edge seems to be missing,and therefore can’t connect to the internet, any ideas.
Thanx Brian
carlos Reply:
July 24th, 2008 at 3:09 pm
were can i download boot neuter? plz help me my iphone is saying it can only make 911 calls
csaces Reply:
October 2nd, 2008 at 8:56 am
so i have had a bunch of trouble trying to use different programs to unlock my first generation iPhone. I recently used the newer version of quickpawn (quickpwnRC3) after having restored my phone back to a clean slate and also downloaded iPhone1,1_2.0.2_5C1_Restore and the 3.9 and 4.1 files also (i forget what there names are).
everything ran fine… i was given instructions and then told to wait as the phone went through different processes and the phone lit up and the last thing it showed was “wait 2 mintues while the final…. is downloaded” and then it went back to the black pinapple sign again. i unplugged it soon after, and now when i turn it on only the pineapple sign comes on and nothing else.
i’ve tried resetting it (holding power button down), starting it in safe mode, redownloading itunes, and running quickpwn again, but my computer and a friends apple (i have a PC) have refused to recognize that there is any device in the USB port.
any suggestions? i have no idea what to do
Kevin Reply:
July 20th, 2008 at 6:55 pm
This worked great but I notice that even with push off my phone is still eating up data. 220kb in about 30 minutes of inactivity
[Reply]
Joel Reply:
July 22nd, 2008 at 2:58 am
Switch on the push and set the Fetch to Manually it should work
[Reply]
James G Reply:
July 21st, 2008 at 12:54 am
whats do i do during the first step using winpwn1.0 RC1
[Reply]
Joel Reply:
July 22nd, 2008 at 2:59 am
if are using unlocked and jailbroken firmware u dont need to use the winpwn James
[Reply]
niles Reply:
July 21st, 2008 at 9:56 am
Ha funny how everyone is talking down on ZIBRI but than publish a site and says “use this link if you use windows and want to up to 2.0″
yes BIG BOSS I mean you.
step 7 in the link (http://iunlocked.org/) you posted states
Step 7: Run Ziphone & Jump your
funny so it is good enough??? or did you just not read the info carefully enough and just posted it to look interesting???????
Please comment that …..
niels_worldwide@hotmail.com
[Reply]
Joel Reply:
July 22nd, 2008 at 3:02 am
Niles this is for the people who are having trouble to put the iphone into DFU or recovery mode manually
[Reply]
narendrn Reply:
July 21st, 2008 at 1:21 pm
its working fine for me, thanks for the effort
[Reply]
Mr.Frosty Reply:
July 22nd, 2008 at 5:53 pm
Hey there, I messed up pretty bad. I tried to pwn my iPhone to 1.14 using the method mentioned above. But WinPwn never actually started pwning, so I used the recovery thingy from iTunes. Now my phone is locked, and when I try to pwn it with WinPwn it actually starts pwning, but it never finishes. After rebooting, after being pwned it shows the recovery image (plug –> iTunes) and won’t do a thing…
Did I completely screw my precious phone?
Help would be greatly appreciated
[Reply]
Learners Reply:
July 22nd, 2008 at 6:07 pm
Use Ziphone “DO IT ALL”,it should go back to normal boot after it finishes.
[Reply]
D-Man Reply:
July 23rd, 2008 at 2:04 am
No you haven’t screwed it… I did the same. To clear the ‘locked’ symptom, upgrade to itunes 7.7 and when you plug in your iphone it will say that it has recognized an iphone in recovery mode and it will need to be restored. Then just click on restore and your away. It takes about 10 minutes but you will then have locked iphone running firmware 2.0. We just need to figure out how to unlock these now!
[Reply]
2. Amit V July 20th, 2008, 1:05 am
is this not a preactivated firmware?
[Reply]
Joel Reply:
July 22nd, 2008 at 2:56 am
Yes Amit it is pre pwned using Mac version of pwnage 2.0 and bundled into IPSW. it will run the boot nuter automatically
[Reply]
3. jollyblue626 July 20th, 2008, 1:12 am
Has anyone tried this yet? I’m curious if it will work. Tho, I would wait till installer comes out with some apps.
[Reply]
Anonymous Reply:
July 21st, 2008 at 8:05 pm
It worked GREAT!
[Reply]
4. Amit V July 20th, 2008, 1:33 am
Anyone please tell me it is activated or ndo have to get it activated from itunes?
[Reply]
Joel Reply:
July 22nd, 2008 at 3:03 am
It is pre activated Amit
[Reply]
5. Squuiid July 20th, 2008, 1:41 am
Is it necessary to PWN the phone first if it has been Ziphone’d on 1.1.4?
Can’t we just use iTunes 7.7 to DFU restore the custom .ipsw without first having to use WinPWN?
Thanks!
[Reply]
Eduardo Reply:
July 20th, 2008 at 8:39 am
Ofcourse you can’t.
PWN it!
[Reply]
6. Bertitude July 20th, 2008, 1:57 am
it works activated and everything just remember to pwn 1.1.4 first
[Reply]
7. Tim July 20th, 2008, 1:58 am
When you use winpwn, what BL should you be on for this to work? I’m on 4.6 BL and I keep getting an iTunes 1601 (or 1602 or 1600) unknown error, which seems to be an Apple error that just requires an uninstall and reinstall, but that doesn’t seem to help me. Thanks.
[Reply]
Tom Reply:
July 20th, 2008 at 3:38 am
I have a 2G with 4.6 BL, neutered and DFU mode gave me 1601. I then put the phone into restore mode (turn off, unplug, hold home and plug in) and then in worked.
[Reply]
Martin Reply:
July 20th, 2008 at 6:43 am
same here. restore mode works fine. DFU mode not
[Reply]
8. Alex July 20th, 2008, 2:12 am
How i can install Step 2 : BootNeuter?
[Reply]
Phil Reply:
July 21st, 2008 at 12:20 am
Go into apps, on your iphone.
and type in bootneuter.
then download it
[Reply]
9. PorcupineTree July 20th, 2008, 2:13 am
WARNING…. There are 2 firmware ipsw, one is for 3G and another for 2G…
You will screw it if you use the wrong one.
For iPhone 2G use:http://rapidshare.de/files/40034819/iPhone1_1_2.0_5A347_Custom_Restore.ipsw.html
For 3G, I don´t know, sorry.
Remember to winpwn your 1.1.4 or whatever version you have before shift + restore in Windows iTunes 7.7…
This WORKS…
[Reply]
anares Reply:
July 20th, 2008 at 10:32 am
What actually happens if you anyway use the wrong one? Could you recover?
[Reply]
netdude Reply:
July 20th, 2008 at 12:58 pm
For iPhone 3G IPSW: http://iclarified.com/entry/index.php?enid=1557
[Reply]
john Reply:
July 20th, 2008 at 10:15 pm
Wait, the IPSW linked at PirateBay must be a modified version of the real 2.0 IPSW for 1st Gen iPhones. How could it be a modified version of the 2.0 IPSW for the 3G iphone??
I think your comment holds no water, and the above steps in the method are valid - UNLESS the uploader of the modified IPSW had PWN’ed the wrong IPSW from Apple, which is possible, but very unlikely.
[Reply]
nyum Reply:
July 23rd, 2008 at 1:31 pm
thanks! it does works!
[Reply]
10. Namorbrowneyes July 20th, 2008, 2:26 am
Hey BigBoss, can we get a link to a custom ipod touch version 2.0 firmware please? That would be awesome.
Nice guides!
[Reply]
11. yone July 20th, 2008, 2:35 am
so for the really stupid ppl out there like me… I assume I need to reset my Ziphone’d 1.1.4 firmware to stock 1.1.4 and then follow above steps by BigBoss?
[Reply]
Scott Reply:
July 20th, 2008 at 7:04 pm
Your phone has to be pwned. This will not work with a Ziphoned phone!!
[Reply]
12. liquid July 20th, 2008, 2:37 am
So if we do this, we’ll get a JB, unlocked and activated iPhone right?
[Reply]
13. Ravi July 20th, 2008, 2:47 am
yes work no problems, thanks
[Reply]
14. jay July 20th, 2008, 2:51 am
could you host d 2.0 custom firmware for download since the link above doesn’t work…
thanks.
[Reply]
15. Jose July 20th, 2008, 3:10 am
I found this firmware, it claims to be for ipod touch… http://www.megaupload.com/?d=Y3IIKFTJ don’t know if it works or not, i might try it tomorrow…
[Reply]
16. Mokitoloki July 20th, 2008, 3:17 am
Works great! I installed it just using itunes 7.5, my 1.1.4 iphones was not pwned and it just worked fine!
[Reply]
phredee Reply:
July 20th, 2008 at 7:09 am
YEAY!!! I took your advice!! it REALLY WORKS!!! this is frikkin great!!! honestly there wasnt a real hassle doing it mokitoloki’s way.. im glad i didnt have to go through the whole pwnage!!! thanks mokitoloki!!!
[Reply]
manoj Reply:
July 22nd, 2008 at 12:34 am
hey phredee, could u give me step by step direction how u changed ur version, please, i am frikkin confused, please help bro
[Reply]
17. Pheary July 20th, 2008, 3:25 am
Confirmed, works perfect (1.1.4 pwned -> 2.0). Jailbreak, activated, and unlocked on T-Mobile! Thanks!
SOLUTION FOR ERROR 1600: Use RECOVERY mode, NOT DFU. This fixed it for me. Posting from iPhone :)
[Reply]
18. amr July 20th, 2008, 3:38 am
where is the installer on firmware 2.0??? i only see cydia
[Reply]
19. asd July 20th, 2008, 3:45 am
at this moment Installer is not working on 2.0..so you must use cydia and wait for a update
[Reply]
20. joe July 20th, 2008, 3:48 am
can someone tell me how to run neuter? i have it installed
[Reply]
21. Marco July 20th, 2008, 3:48 am
Hey dudes.
Do I neuter it to be 3.9 or 4.6 ?
[Reply]
22. joe July 20th, 2008, 3:55 am
hi people, i rellay need to know what the step are to run neuter. do i have it open or do i click on flash? 3.9 or 4.6?
[Reply]
23. Marco July 20th, 2008, 3:56 am
Yeah same here. Dont want to mess this up.
[Reply]
24. Kevin Michael Strasters July 20th, 2008, 3:57 am
i have done exactly what it says… but when the iPwner asks to connect my phone in recovery mode… i do as such but it just sits there…
does recovery mode have the usb arrowing towards the itunes logo?
[Reply]
Marco Reply:
July 20th, 2008 at 4:00 am
Yeah it does. You might not be putting it correctly into recovery mode.
[Reply]
25. PT July 20th, 2008, 3:57 am
Thanks for the information. I just upgraded my iphone which was previously WINPWNed with out a glitch. Thanks!
[Reply]
26. Marco July 20th, 2008, 4:03 am
OK I just used the 4.6 with Neuter On, FakeBlank Off, and Unlock On. Hope that was correct. Ill let you guys know what happens.
[Reply]
27. Kevin Michael Strasters July 20th, 2008, 4:03 am
and is DFU acceptable instead of recovery mode?
[Reply]
Marco Reply:
July 20th, 2008 at 4:04 am
Mine had trouble getting into recovery mode. I made sure the iphone was disconnected put it into recovery mode and then I connected and ran winpwn
[Reply]
Kevin Michael Strasters Reply:
July 20th, 2008 at 4:15 am
do u have an msn or an aim account that we could talk in real time… cuz i think i’m doing the recovery thing correctly
[Reply]
28. Marco July 20th, 2008, 4:09 am
YES IT WORKED. I have a 2.0 jailbroken and unlocked!
[Reply]
MR BLACK Reply:
July 20th, 2008 at 5:35 am
was you on 1.1.4 before this
[Reply]
29. dan July 20th, 2008, 4:10 am
pc sucks…mac rules
[Reply]
30. Kevin Michael Strasters July 20th, 2008, 4:18 am
does dfu mode work in place of recovery mode?
[Reply]
Marco Reply:
July 20th, 2008 at 4:21 am
I dont think so. Just place it in recovery mode. Use Ziphone if you need to to just place it in recovery mode. I’m gonna make a video of this tomorrow for sure. Windows users need to benefit also.
[Reply]
Kevin Michael Strasters Reply:
July 20th, 2008 at 4:24 am
again i ask you… do u have aim or msn that i can talk real time with you?
[Reply]
Marco Reply:
July 20th, 2008 at 4:27 am
email me at wonderroom@gmail.com lets chat through there.
31. Raven268 July 20th, 2008, 4:22 am
Will this worked if I had restored the 2.0 firmware on 1st gen iPhone?
[Reply]
Marco Reply:
July 20th, 2008 at 4:24 am
I dont know. I suggest you downgrade from 2.0 and then follow the instructions.
[Reply]
32. John July 20th, 2008, 4:24 am
2.0 Custom Firmware available on a direct download here:
http://www.iphone-releases.com/downloads/iphone-2-0-pwnage-on-windows-1/
[Reply]
33. Marco July 20th, 2008, 4:26 am
Im going to bed guys. Good luck!
[Reply]
34. joe July 20th, 2008, 4:30 am
im getting 1600 error what do i do?
[Reply]
Marco Reply:
July 20th, 2008 at 4:33 am
Restore again and select the custom 2.0 file again. That’s what I had to do and it worked.
[Reply]
tom Reply:
July 20th, 2008 at 4:33 am
“Update 3: If you get Error 1600 from iTunes (or if you see in your log a failure to prepare x12220000_4_Recovery.ipsw), try: mkdir “~/Library/iTunes/Device Support” ; if that directory already exists, remove any files in it. Then re-run PwnageTool.”
[Reply]
35. amr July 20th, 2008, 4:32 am
2.0 has no actual use appstore i am not in the supported countries wtf
[Reply]
Tom Someone. Reply:
July 21st, 2008 at 8:42 pm
( Proxy ;))
[Reply]
Tom Someone. Reply:
July 21st, 2008 at 8:43 pm
Fake address and stuff ;)
[Reply]
36. Kevin Michael Strasters July 20th, 2008, 4:38 am
for windows users… how long did it take winpwn to recognize ur phone in recovery mode?
[Reply]
Marco Reply:
July 20th, 2008 at 4:39 am
Dude IM me on AIM: wonderrooms
[Reply]
37. joe July 20th, 2008, 4:39 am
thanks for the replys i keep running the process but i keep getting 1602 error wtf lol
[Reply]
Marco Reply:
July 20th, 2008 at 4:43 am
I dont know what to tell you there. I got the 1602 error also. Recovered the iphone and then restored back to the same custom 2.0 file and it worked.
[Reply]
38. Mythul July 20th, 2008, 4:39 am
Dude u can get a fake Itunes account.Go to the hackintosh forum to get instructions.Im from East-Europe and got an itunes acc in USA and Japan.Reply here for instructions if u cant find it.
[Reply]
anomali Reply:
July 20th, 2008 at 6:53 am
hey.. ive search on the forum for the fake accounts but cant find anything?
Can you be a good guy and mail me the info on where to find it on anomali71@gmail.com ?
Thanks a bunch :)
[Reply]
39. Marco July 20th, 2008, 4:44 am
By the way EVERYTHING gets lost. No contacts.nothing. sucks but with a loss comes an upgrade! :)
[Reply]
40. Moncius July 20th, 2008, 4:47 am
Allways the MacMans. What appened with the guys use windows? what appened?
I dont underestand why the team put first the macs computers.
I do this instruccions and after of use this, i have the same 1.1.4 version than before.
Sorry Team but I think tath this work is not soo great.
[Reply]
41. joe July 20th, 2008, 4:49 am
lol i think im gonna stick 1.14, none of this is working for me
[Reply]
42. O July 20th, 2008, 5:02 am
Worked fine, you just need to follow the instructions exactly, I didn’t even have a pwnd 1.1.4 install, just install neatuer. Thanks for the tip for us windows users :o)
[Reply]
NJJohn Reply:
July 20th, 2008 at 11:51 am
what do you do with neuter? what options etc. Thanks
[Reply]
43. Chrelle92 July 20th, 2008, 5:02 am
Hey guys, i was thinking if anyone could get the 2.0 firmware and upload to another place than thepiratebay so i could download it thx :D
[Reply]
44. macaz July 20th, 2008, 5:05 am
In ine if the unfortunates who cant downgrade to 1.1.4 and am at the locked 2.0 screen, for us this is useless I think! shame
[Reply]
45. Kevin Michael Strasters July 20th, 2008, 5:06 am
is ne1 doing this on the 3g phone?
[Reply]
46. macaz July 20th, 2008, 5:06 am
Sorry to double post…. has anyone tried this with VMware yet??
[Reply]
47. Tania July 20th, 2008, 5:10 am
Pleeeeaaaaaase,upload the pre-created IPSW to another place, like rapidshare! Thanks!!
[Reply]
48. gregg July 20th, 2008, 5:10 am
yeah my piratebay download going so slow can anyone who has this file upload to sendshare. Would really appreciate it
[Reply]
49. Srini July 20th, 2008, 5:15 am
That was EASYYYY!! :) thank you so much .. b.t.w for all you guys getting error due to DFU/Recovery.. the best method is to use ziphone, under zipohone go to advanced and select to put the phone in recovery mode.. and it works PERFECTLY… yepppppiee.. im on 2.0 and my exchange works!
[Reply]
Dan Reply:
July 20th, 2008 at 4:51 pm
what options do you put for bootneuter, or do you not use that at all. no one has been answering this for a long time. by the way, do you really lose all your contacts, photos and notes?
[Reply]
50. theiPhonedude July 20th, 2008, 5:22 am
this is just great.. i’m just waiting to finish the custom IPSW. Let’s see.. looks like it’s gong to work.. Thanks
[Reply]
51. oby July 20th, 2008, 5:22 am
so this works 4 the new 3g 2.0 iphones rite?
[Reply]
52. Jorj July 20th, 2008, 5:29 am
Nice! trying it now
[Reply]
Jorj Reply:
July 20th, 2008 at 6:09 am
Success!
thanks
[Reply]
53. MR BLACK July 20th, 2008, 5:33 am
My phone is on 1.1.4 if i upgrade to 2.0 my phone will get bricked as its unlocked and jb will this option pwnage 2 fix it
thanks
[Reply]
54. Mike July 20th, 2008, 5:36 am
Can anyone give me more details on the custom firmware file? Like.. It’s jailbroken and unlocked right? Does it have both basebands, changeable in Bootneuter?.. Does it have custom boot logos and restore logos? (I don’t want those) etc etc.. :/
[Reply]
Joe Reply:
July 20th, 2008 at 6:21 am
It’s a vanilla (default) file. Nothing really changed besides jailbreaked, unlocked. Bootnueter does its thing when the phone restarts but afterwards I ended up with the 4.6 baseband.. or so I’m assuming.
[Reply]
55. joe July 20th, 2008, 5:37 am
ok people minehas worked after i used recovery mode not dfu mode. if you get erros 1600 or 1602 in itunes, use ziphone to put your phone into recovery mode and it will work
[Reply]
56. Alladin July 20th, 2008, 5:40 am
Will it work with iPhone 3G aswell??
[Reply]
58. Kaj July 20th, 2008, 6:17 am
100% Working no lie.
[Reply]
60. bamboo July 20th, 2008, 6:26 am
Bigboss i succesfully updated to 2.0, cydia installer is included but i coudnt find your BOSSPREFS, i just realized that i cancelled my data plan a couple of days ago, and i have no way off turning off my EDGE. is there any other way to turn off EDGe while waiting for you to port BOSSPREFS to cydia 2.0 ? =P thanks in advance
[Reply]
manoj Reply:
July 22nd, 2008 at 12:51 am
hi bamboo
could u mail me on manojs911@gmail.com step by step how u upgraded , please help, i am frikkin confused,
[Reply]
61. Kaj July 20th, 2008, 6:26 am
???? What u say?
[Reply]
62. joe July 20th, 2008, 6:26 am
LOL
V.2.0, App Store, And on Orange UK, thanks everyone and F.U Apple!!
[Reply]
ben Reply:
July 20th, 2008 at 7:35 am
I’m on orange. Did u use a custom 1.1.4 firmware first before uploading the 2.0 firmware
[Reply]
63. Kaj July 20th, 2008, 6:29 am
Damn must register to store and have visa. :/
[Reply]
64. Stunnaz July 20th, 2008, 6:39 am
There is no way to do this since the link to the firmware is dead.
[Reply]
65. nutekl July 20th, 2008, 6:42 am
Can someone upload the custome firmaware in rapidshare etc? i hate torrent :)
Many thanks
-nute-
[Reply]
66. James July 20th, 2008, 6:46 am
Piratebay is down… it’s impossible at this point. Any other way for Windows users?
[Reply]
67. edem July 20th, 2008, 6:47 am
i need another link (not the torrent one) for the custom firmware! its slow
[Reply]
68. Noob July 20th, 2008, 6:52 am
Hello People,
I have a ZiPhoned 1.1.4 with 3.9 BL. Will it work if I winpwn it first and then restore this ipsw file?
My question being will this work for 3.9 BL?
thanks in advance!
[Reply]
69. b July 20th, 2008, 6:55 am
it works with ipoda touch?(not iphone)
[Reply]
70. Saiyam Vora July 20th, 2008, 6:58 am
I am Uploading the custom firmware to rapidshare, and will be putting up the link once its uploaded(0:55 left). So i tried this and it works flawlessly, really easy to do. I didnt install bootneuter on my 1.1.4 to neuter the phone since my Iphone couldnt catch my neighbors wireless signal. Although the custom firmware has bootneuter on it, and it automatically neuters your phone for you!!:-)
[Reply]
edem Reply:
July 20th, 2008 at 7:36 am
thx Saiyam we r looking forward to see it! :)
[Reply]
manoj Reply:
July 22nd, 2008 at 12:54 am
hi saiyam
could u possibly give me step by step direction how to update as i am pretty confused , thank, my id is manojs911@gmail.com
[Reply]
71. James July 20th, 2008, 7:02 am
Everybody share the firmware after you’re finished!
[Reply]
72. Gegg July 20th, 2008, 7:07 am
Thanks alot Saiyam appreciate it
[Reply]
73. ben July 20th, 2008, 7:07 am
If I use winpwn to pwn 1.1.4 do I need to upload a custom 1.1.4 firmware first. My phone is unlocked with iplus 2.0 at the mo
[Reply]
74. nutekl July 20th, 2008, 7:09 am
http://rapidshare.de/files/40034819/iPhone1_1_2.0_5A347_Custom_Restore.ipsw.html
Try this one!
[Reply]
75. Mythul July 20th, 2008, 7:09 am
I WANT TO DONATE.THANKS YOU DEV-TEAM
[Reply]
76. sendblink23 July 20th, 2008, 7:15 am
I have a SIMPEL Question, my iTouch, hasnt been Pwned before… if I .. Load Custom Images *boot / Restore ….. when i Restore with the Custom ipsw, would I still be having my Custom Images ???
By the way THE MEGA UPLOAD that was mentioned here for *iTouch DOES WORK
Well plzz somebody help me out, cuase i created soem great bootloader and Restore Image, that I wish to Use *PC
[Reply]
77. sendblink23 July 20th, 2008, 7:17 am
ohh I mean Fresh PWNING 1.1.4 .. (if I still keep my Custom Boot.Restore Images) … before installing Custom 2.0 ???
[Reply]
78. ben July 20th, 2008, 7:31 am
This won’t work for the iPhone 3G unless you somehow downgrade to 1.1.4 first.. not sure if this is possible??
[Reply]
79. kinetic-x July 20th, 2008, 7:47 am
I wrote the guide listed above. I updated it a bit at: iunlocked.org. Any questions you can go there.
[Reply]
80. Anonymous July 20th, 2008, 7:47 am
I did it after 4 month of waiting i can sync my exchang. Thank you all for your efforts. The sugested pwange for windows worked perfect by fallowing the steps
[Reply]
81. Dominik July 20th, 2008, 7:49 am
THANK YOU! Your stuff is the best!
[Reply]
82. edem July 20th, 2008, 7:49 am
great job of the guide kinteic-x!
just need more source to get the custom firmware!
[Reply]
83. flower July 20th, 2008, 7:52 am
if I ask someone who has mac
and can he help me “make” a 3g custome firmware2.0
and send it to me so that I can use itunes7.7 + that IPSW to activate and jailbreak
am I right?could it possible?
[Reply]
84. Dominik July 20th, 2008, 7:53 am
Customized 2.0-firmware to use under windows:
http://thepiratebay.org/tor/4305453/iThor__s_iPhone_2.0_Custom_Firmware_Vanilla_(5A347)
T
(Here you’ll get a TORRENT-link. There’s nothing down now. All functions very well!!!)
[Reply]
85. kinetic-x July 20th, 2008, 7:55 am
You can come onto irc with any questions / comments: irc.iunlocked.org. Ill be adding a downloads section on the iUnlocked site to help get some of the tools
[Reply]
sendblink23 Reply:
July 20th, 2008 at 8:18 am
I have a Question…
If I freshly PWN my iTouch, with Boot/Restore Images i made my Self, when PWNING on 1.1.4, when I later on Do the DFU/Normal … Restore with the Custom FW 2.0 will I still keep my Custom Made booloader/Restore images ??
[Reply]
86. James July 20th, 2008, 7:58 am
All the tools are widely available except the firmware.
[Reply]
87. anomali July 20th, 2008, 8:11 am
still no working link to the firmware? :(
[Reply]
Anonymous Reply:
July 20th, 2008 at 8:15 am
mail to hflorescu@gmail.com i will try to send it by email
[Reply]
sendblink23 Reply:
July 20th, 2008 at 8:22 am
not possible its 230mb the File :P
Well duh they could send you the LINK by the way THE TORRENT (in the TOP) Works and FAST download uTorrent make sure your Settings are well Set in the uTorrent
well depending the Torrent Link is for iPhone
For iTouch USERS: http://www.megaupload.com/?d=Y3IIKFTJ
[Reply]
88. ar2r July 20th, 2008, 8:14 am
RAPIDSHARE links to iPhone1,1_2.0_5A347_Custom_Restore:
http://rapidshare.com/files/131080311/iPhone1_1_2.0_5A347_Custom_Restore.part1.rar
http://rapidshare.com/files/131083376/iPhone1_1_2.0_5A347_Custom_Restore.part2.rar
[Reply]
ar3r Reply:
July 20th, 2008 at 11:22 am
For those who took this option, as did I, what you need to do is to unrar the files into a folder, and then ZIP the contents of that folder into a file.
You are NOT zipping the folder, but the CONTENTS of the folder. You can give this file name any name you want. When it is finished, you will have a file name ending in ZIP.
What you need to do is to rename this file so that it ends in .IPSW intead of .ZIP.
Do this in CMD if you can’t do it in Windows.
Anyway this is how I got iTunes to recognise the contents of the two RAR files, because when I first unrar’ed them I unded up with a folder!
Anyway I’m now happily on iPhone Firmware 2.0. I did do the BootNeuter first but it looks like you don’t need to do that because after the firmware is loaded the first thing it does is to run bootneuter 2.0 and re-flashes your baseband etc.
I downloaded BootNeuter 1.0 from the Installer.app just to be sure even though some people below said that it wasn’t necessary… I did it to be on the safe side but now I see that I didn’t need to do it. Oh well, it only took a few mins, so no big loss.
ok… good luck to you all… thank you Dev team, thank you Big Boss, thank you Kinetic-X and thank you to everyone else here!
Cheers
FSJ-) :-) :-)
[Reply]
89. custom firmware July 20th, 2008, 8:15 am
download:
http://ftp.himera.be/?path=pub/iPhone/Firmware/pwnage/2.0/
[Reply]
90. Gregg July 20th, 2008, 8:22 am
There is plenty of links that work if you have fast enough broadband
http://www.mininova.org/tor/1612779
http://www.fulldls.com/torrent-others-1168505.html
http://www.torrentportal.com/details/3413018/iPhone1,1_2.0_5A347_Custom_Restore.ipsw.html
[Reply]
91. Chrelle92 July 20th, 2008, 8:23 am
Saiyam Vora how long time is there left until your rapidshare file is up ? :D
[Reply]
92. DIR-PRO July 20th, 2008, 8:25 am
they won’t let us to send the upload file!!!
why !!!!!!!!!!!!!!!!!!!!
[Reply]
93. Gregg July 20th, 2008, 8:27 am
I think they have stopped you sending links can you send to my email? xteamsystem@gmail.com
[Reply]
94. James July 20th, 2008, 8:29 am
Can someone upload it to mininova? Pirate Bay is down.
[Reply]
95. Gregg July 20th, 2008, 8:30 am
its already on mininova
[Reply]
96. edem July 20th, 2008, 8:30 am
cant send a 236 mbyte file on email i guess.
need rapidshare or megaupload link
[Reply]
97. James July 20th, 2008, 8:33 am
It’s not on mininova. Pirate Bay is down
[Reply]
98. Saiyam Vora July 20th, 2008, 8:33 am
Here you go RAPIDSHARE LINK
http://rapidshare.com/files/131074720/iPhone1_1_2.0_5A347_Custom_Restore.rar.html
[Reply]
edem Reply:
July 20th, 2008 at 8:43 am
Saiyam!
Need premium acc to download more then 200mbyte :(
awwwwwwwwwwwwwwwwwwwwwwwwwwwwww
if it isnt hard can u crop it into 2 files?
[Reply]
99. Gregg July 20th, 2008, 8:34 am
http://www.mininova.org/tor/1612779
[Reply]
100. Gregg July 20th, 2008, 8:35 am
mininova org / tor / 1612779
[Reply]
101. Phono July 20th, 2008, 8:35 am
Wow, this is so gay… no way to do this because no firmware available.
[Reply]
102. Gregg July 20th, 2008, 8:35 am
remove the gaps you cant put links on here
[Reply]
103. DIR-PRO July 20th, 2008, 8:36 am
All torrents is down !!!!
[Reply]
104. Piz July 20th, 2008, 8:37 am
Is there a need to have to go back to a stock 1.4 and then pwn and neuter ?
I have an already jailbroken unlocked 1.4, cant I just install Neuter, run it and continue from there.
Do we have to go back from a 1.4 ziphone to a stock 1.4 and then pwn ?
[Reply]
105. Gregg July 20th, 2008, 8:38 am
its working for me from torrent very slow though 2500 leechers and 70 seeds. Give your email and i will send you the torrent file
[Reply]
106. kinetic-x July 20th, 2008, 8:39 am
There are copies of the ipsw available you just need to look. Anyone who wants to give me another working torrent link ill be happy to post the link on the iunlocked.org site and update the guide.
[Reply]
107. Gregg July 20th, 2008, 8:42 am
some very nice guy just emailed me the sendspace link thx alot for that. File number fka399
[Reply]
108. Phono July 20th, 2008, 8:44 am
Gregg the torrent link you posted is working for me… 234mb file right? It’s downloading right now, thanks.
[Reply]
109. Alladin July 20th, 2008, 8:45 am
Has someone downgraded the 3G phone and than used instructions as here to jailbrake?? is there any other way to jailbrake iPhone 3G as being a Windows user?? please help!!
[Reply]
110. Phono July 20th, 2008, 8:45 am
Only way to get this thing going is by torrent… there is no other way because too many people want it.
[Reply]
111. Gregg July 20th, 2008, 8:47 am
no worries, I just realised that sendspace link someone emailed me is for 3g not 1g
[Reply]
112. Piz July 20th, 2008, 8:48 am
So are those with 1.4 already unlocked and jailbroke and neutered just starting from there or going back to stock 1.4 and then pwn as per the guide ?
Do we have to go back to go forwards or is the guide refering to stock non jailbroken / neutered phones ?
[Reply]
113. Pume July 20th, 2008, 8:48 am
Works like a charm. If you follow the instructions you should not have any problems.
[Reply]
114. DIR-PRO July 20th, 2008, 8:49 am
Try here:
h++p://www.iphones.ru/forum/index.php?showtopic=22621
[Reply]
115. Phono July 20th, 2008, 8:57 am
Here is the working mininova link for the file for those of you who need it:
http://www.mininova.org/tor/1612779
Fast download. After you’re finished please continue to seed.
[Reply]
116. Thomas July 20th, 2008, 9:01 am
Little question: Where is the Sendspacelink for iphone 3g?????
THANKS!!
[Reply]
117. Wait...What? July 20th, 2008, 9:01 am
Has anyone started with a 1.1.4 ziphone jailbroken phone yet? Do we need to return to stock 1.1.4 before pwning and pwning again?
[Reply]
118. Piz July 20th, 2008, 9:03 am
Exactly the same thing I am trying to find out. Can I just neuter my phone and carry on with the guide from that point seeing as I already have a ziphone 1.4 unlocked jailbroken ?
Anyone in the knows advice would be greatly appreciated.
[Reply]
Awayze Reply:
July 20th, 2008 at 9:14 am
No, you need a PWNED iPhone otherwise you will get an error in iTunes as its an unapproved Apple software.
[Reply]
119. Gregg July 20th, 2008, 9:06 am
sendspace com/file/fka399
[Reply]
edem Reply:
July 20th, 2008 at 9:11 am
THANKS GREGG!
LUV U
[Reply]
120. R July 20th, 2008, 9:07 am
Hey guys thanks for the process, here’s what I did to get my iPhone working… I have the first gen iPhone and used Ziphone to unlock, jailbreak v1.1.4.
(Before I begin if I had to do the process again I would’ve backed up my iPhone before starting - some contacts and text messages were deleted as I had added them since my last backup.)
Anyhoo,
1. Downloaded WinPWN & 1.1.4 IPSW file (from Apple) & custom 2.0 IPSW file (from Pirate Bay)
2. Updated iTunes to 7.7
3. Connected iPhone to computer (I should’ve backed up my phone at this point). Then closed down iTunes.
4. Ran WinPWN, clicked on “Browse IPSW” and located 1.1.4 IPSW file that I downloaded.
5. WinPWN whirred away and then prompted to me enter “Recovery Mode”
6. I opened up iTunes and Shift+Clicked the Restore button under the iPhone tab, and then located the custom 2.0 IPSW file.
7. From this point I didn’t touch anything! iTunes and the iPhone whirred away and installed/updated my iPhone. Bootloader automatically installed (I found it took longer than the predicted 2 minutes to flash). And when everything was done iTunes asked if I wanted to restore my iPhone to the last back up which I assented to and clicked continue and then 5 minutes later my iPhone was backed up with all the text messages and contacts and notes.
8. When I clicked back on WinPWN the pop up had changed to “Your iPhone has been pwned!”
9. I sent a text message, made a phone call, received a phone call, Cydia loaded, App Store loaded - even bought and played Super MonkeyBall!
So far so good guys! Thanks!
Hopefully my details help.
[Reply]
redflag Reply:
July 20th, 2008 at 9:25 am
so theres no need to use “BootNeuter”??
[Reply]
d Reply:
July 20th, 2008 at 10:00 am
spot on! didn’t need to Neuter. everything working so far.
Thanks for sharing the steps.
[Reply]
MR BLACK Reply:
July 20th, 2008 at 12:58 pm
how did itunes load the custom 2 software
what did press shift and restore on itunes ??
[Reply]
121. Gregg July 20th, 2008, 9:10 am
oh he did send me the 1g link also www depositfiles com/en/files/6665963
[Reply]
122. joe July 20th, 2008, 9:16 am
hey if anyone needs any help with there upgrade add me on msn and i can help you real time
joe.jordaney@gmail.com
[Reply]
Awayze Reply:
July 20th, 2008 at 9:32 am
Hey,
Can I not just restore my iPhone using iTunes to 1.1.4 and then open Winpwn and PWN the iPhone.
Then open iTunes and select the custom 2.0FW provided in this guide(http://thepiratebay.org/tor/4305453/iThor__s_iPhone_2.0_Custom_Firmware_Vanilla_(5A347))
Thanks
[Reply]
123. Chris July 20th, 2008, 9:20 am
Greg is that for 2G or 3G?
[Reply]
124. Gregg July 20th, 2008, 9:21 am
for 2g, the 1st link was for 3g you can tell by the 1st part of the file 1,1 is 2g and 1,2 is 3g
[Reply]
125. Streeter July 20th, 2008, 9:24 am
Thought this might be usefull info to some:
After carfully fallowing the instructions to the tee i kept getting error 1601. I tried restore and DFU mode with no luck…:( However, just clicking shift-restore and finding the vanialla ispw my fone seems to be restoring to jailbroke 2.0 now!!! Im excitied to play around with the 2.0 firmware… hopefully not too buggy llike i hear… fones restarting now…Bootneuter 2.0 popped up and it is flashing the baseband… seems like its working ill let u guys know if i run into any road blocks..
[Reply]
126. Streeter July 20th, 2008, 9:33 am
:-( i forgot how ugly the stock dock is…
[Reply]
127. redflag July 20th, 2008, 9:35 am
now “R” says nothing about installing and running “BootNeuter” in his tutorial
so is it NESSESARY to run “BOOTNEUTER”??????
(iphone 2g 1.1.4 ziphoned)
[Reply]
tom Reply:
July 20th, 2008 at 9:38 am
no you don´t need if you have the torrent IPSW
[Reply]
128. Anti July 20th, 2008, 9:38 am
A friend said his IMEI changed to something else after using this. Is that even possible?
[Reply]
129. Thomas July 20th, 2008, 9:41 am
So, now I have the ispw for 3g.
And then? only restore in itunes?
Or is it necessary to run WinPin
[Reply]
130. Rapidshare-Mirror July 20th, 2008, 9:43 am
Rapidshare Mirror for the Windows-Edition:
http://rapidshare.com/files/131088051/iPhone1_1_2.0_5A347_Custom_Restore.part1.rar
http://rapidshare.com/files/131105426/iPhone1_1_2.0_5A347_Custom_Restore.part2.rar
You have to download both files and unpack them with WinRAR
[Reply]
131. R July 20th, 2008, 9:45 am
Hi guys,
No I never ran Bootneuter, I think it automatically ran with the bootloader prompt screen as I saw in the background the option to choose 3.6 and 4.5 (or whatever those two numbers are), but didn’t need to select or do anything… I just let it run, and waited patiently (more than the 2 minutes requested, probably ended up being 5 minutes)… and it eventually updated.
[Reply]
132. Raven268 July 20th, 2008, 9:46 am
Need to ask, if I had a 1st gen iPhone updated with stock 2.0 firmware & it is currently locked. What should I do?
[Reply]
133. Piz July 20th, 2008, 9:52 am
All I did from 1.4 Ziphone jailbroke unlocked was neuter my phone and then restore with the custom firmware in itunes. All back on and touch wood seems fine.
[Reply]
134. Denis July 20th, 2008, 9:58 am
Congratulation for those who was successful unlocked their phone to 2.0
But please think about give and take, after you take it, why don’t you give it? Just upload the 2.0 firmware for all the people, so all the people can feel your excitement.
[Reply]
135. max July 20th, 2008, 10:05 am
i pwned my 2g iphone to 2.0 everything works fine so far except one problem is it possible to ssh into the phone, i cant .
Any help appreciated
[Reply]
136. DIR-PRO July 20th, 2008, 10:09 am
2G
depositfiles com/en/files/6665963
3G
depositfiles com/en/files/6659818
[Reply]
137. max July 20th, 2008, 10:11 am
I figured it out, just install ssh from cydia and your set to go, Dev Team yous are the best!!!
[Reply]
sidkneeeeee Reply:
July 20th, 2008 at 8:55 pm
how and what program in cydia “open ssh” or “auto ssh”, and on windows what program did you use ie “cuteftp”
[Reply]
138. koban July 20th, 2008, 10:13 am
If you already have an unlocked phone you just need to install bootneuter and restore to the custom 2.0 file in iTunes. Works great! Thanks dev team!!!
[Reply]
139. kinetic-x July 20th, 2008, 10:18 am
Sorry guys my guide sites been flaky today. There were some questions on irc regarding which recovery mode to put it into i uploaded a screenshot of ziphone via http://iunlocked.org/ Any questions drop on irc I can probably help
[Reply]
140. Awayze July 20th, 2008, 10:25 am
I’m on 1.1.4 and used ziphone to unlock.
So can i just go to Installer and install bootneuter and then restore to the custom firmware.
I’m on iTunes 7.7. Do I need 7.5?
[Reply]
Piz Reply:
July 20th, 2008 at 10:27 am
Yes you can.
[Reply]
Awayze Reply:
July 20th, 2008 at 11:02 am
How sure are you? Because then whats the point in pwning the iPhone.
[Reply]
141. tom tom July 20th, 2008, 10:26 am
Can ANYONE tell me how to ddo this when uve got version 2.0 and its never been pwned?????? HELP HELP HELP
[Reply]
edem Reply:
July 20th, 2008 at 10:32 am
maybe read the instroctions next time.
[