Good news for you windows users! Quickpwn for 2.0.2 is out. You can download it here. This is the GUI version. You can use my quickpwn GUI guide here for this. Remember, this does not activate or unlock. So, you only want to use this if you are able to run 2.0.2 and already have phone service with your sim. For those that need more such as an unlock, you should wait for the full pwnage before moving to 2.0.2.
A few points to remind everyone:
1) This is for those that already updated to 2.0.2. It does not provide you with 2.0.2 as part of the process.
2) You can get 2.0.2 firmwares from my firmware page here.
3) If you’re having problems with the DFU steps, refer to my DFU page here.
4) Custom firmwares cannot be used with this process. It works differently. Where pwnage will allow you to create a firmware, pwn your device, then restore that firmware, this process will only pwn your phone and allow you to do so without a restore.
We have moved our feed source. Please resubscribe if you are an old subscriber
Subscribe through a RSS feed reader
1. A.T August 21st, 2008, 5:35 am
The C:/ windows just say “Please wait …is being jailbroken”
The iPhones turned on with Installer and Cydia, should I just close the window now because I’m going to close it?
[Reply]
Bryon Brock Reply:
August 26th, 2008 at 1:36 pm
Here is a fast mirror to download QuickPwn GUI 150: http://www.iphone-hacks.com/downloads/file/138
[Reply]
jamie donohue Reply:
October 8th, 2008 at 1:12 am
thank you sooooooooooooo much!ive been trying to break my phone for some time and you guys have cured it!cheers fellas, your AWESOME
[Reply]
2. Leon August 21st, 2008, 6:05 am
I’m on 2.0.1 already, and would like to quickpwn to 2.0.2. Where can I find the 2.0.2 ipsw as your quickpwn guide only links to the 2.0.1 one.
Thanks!
[Reply]
BigBoss Reply:
August 21st, 2008 at 7:04 am
My firmware page in my guides section always has the latest firmwares: http://sleepers.net/news/blank/iphone-firmware-files/
I’ll update the post with clickable links.
[Reply]
3. Baadshah August 21st, 2008, 6:45 am
can someone pls make a custom firmware file, so i can install it, as my iphone is already pwned.
Pls make it like it has always been, a custom firmware will be nice. Thanks.
[Reply]
BigBoss Reply:
August 21st, 2008 at 7:05 am
This is quickpwn no custom firmwares can be used.
[Reply]
Elric Reply:
August 22nd, 2008 at 8:52 am
But if someone has Windows, can’t they make it in Quickpwn and then let us Mac users UPDATE ours to that custom one? So we don’t lose all our stuff….
[Reply]
A.T Reply:
August 23rd, 2008 at 9:21 pm
It has a very similar method to ziphone. It’s only for windows yet, quickpwn as of yet will not work on mac no matter what.
It has nothing to do with custom firmwares, it just jailbreaks the firmware running on the iPhone/Touch and pwns the device.
4. GodEater August 21st, 2008, 7:00 am
Followed the guide all the way through using the new 2.0.2 ipsw - the restore doesn’t appear to work though, as I’m left with a (still jailbroken) 2.0.1 firmware.
[Reply]
BigBoss Reply:
August 21st, 2008 at 7:05 am
Yea you have to be on 2.0.2 already. Will update the post.
[Reply]
5. Imran August 21st, 2008, 7:11 am
Same happened to me… still on FW 2.0.1
[Reply]
chaxkal Reply:
August 25th, 2008 at 5:49 am
You have to DFU Restore ipod or iphone to the version from apple. After doing this you use quickpwn to jailbreak the version you currently have running.
example. I have a 2.0.1 version, so I need to have 2.0.1 version ipsw and the quickpwn will jailbreak it to the same 2.0.1 version, it will install cydia and installer if you choose.
If you want to have 2.0.2, then upgrade ur phone or ipod normally as you would from itunes, then download the corresponding version, 2.0.2 from the web, and quickpwn to jailbreak that same version having cydia and installer on the homescreen, not in preferences
hope this helps
[Reply]
6. Imran August 21st, 2008, 7:15 am
Pls…Kindly post Custom 2.0.2 Firmware….waiting…
[Reply]
7. NoHelp August 21st, 2008, 8:17 am
Upgrade went well but now I can’t see Cydia or Preferences. Both were in BossPrefs, which is now gone. Any suggestions?
[Reply]
NoHelp Reply:
August 21st, 2008 at 9:23 am
I do see installer. Is there a source that has Bossprefs, poof or openssh?
[Reply]
afdad Reply:
August 21st, 2008 at 4:14 pm
The same has happened to me. Neither Cydia nor Preferences show up, because they were both hidden within BossPrefs. Jailbreak went fine. But since apps installed by Cydia do not show up, I cannot unhide Cydia.
Well, back to 2.0.1….
[Reply]
8. SenHao August 21st, 2008, 8:22 am
I have already on version 2.0.1 and have lots of app installed. How do I upgrade it to 2.0.2 without loosing anything?! When I upgraded from 2.0.0 to 2.0.1 I lost all of my apps and I had to load it one by one again. Thanks for your help!
[Reply]
Leadergo Reply:
September 3rd, 2008 at 11:16 pm
i dont know why that might have happened to you, but try to backup your ipod/iphone, then update. if you were to lose those apps, just sync your ipod/iphone to retrieve them back.
[Reply]
9. Vini August 21st, 2008, 8:26 am
Has always U have A EXELENT Support Come On Evertyng is working wonderfull I woul Like To change just the boot picture Can I … How
Tkx HAve a good day
[Reply]
Leadergo Reply:
September 3rd, 2008 at 11:18 pm
you can’t.
To leave it as the original Apple logo, just uncheck the “Replace Boot Logos”.
[Reply]
10. SBC August 21st, 2008, 8:40 am
Regarding DFU-mode… I have found a much easier way to enter.
Connect to the pc/mac and hold power + menu buttons down at the same time. Don’t start counting yet! Wait until the device turns off and THEN start counting one-two-three (3 seconds), before letting go of the power button. Keep the menu pressed until the pc/mac reacts to your device.
Very simple and has yet to fail. Give it a go :)
[Reply]
SBC Reply:
August 21st, 2008 at 8:41 am
A bit unclear, should read ‘Connect to the pc/mac. THEN hold…’
[Reply]
11. Vini August 21st, 2008, 9:09 am
Hey I was dowloading some cool themes
BUt they do not modify apps icon should I Reinstall apps or what?
[Reply]
Leadergo Reply:
September 3rd, 2008 at 11:10 pm
keep the apps, restart the iPhone, then try enabling them.
[Reply]
12. Johnita August 21st, 2008, 9:29 am
after pwning 2.0.2 by quickpwn 2.0.2, my iphone 3G runs out of signals, wondering why and how to solve this?
[Reply]
vanna Reply:
August 21st, 2008 at 12:16 pm
all you have to do is,eject your sim card, put it back in, then restart your phone..
[Reply]
asa Reply:
August 22nd, 2008 at 12:30 am
Lot’s of people saying this when upgrading to 2.02 on 3g…….
[Reply]
13. irsha August 21st, 2008, 9:41 am
hi
i used quickpwn 2.0.1 successfully.
the bootup logo has changed to a pineapple. is there any way that this logo can be changed back to the original apple?
Thanks bigboss for the easy tool, appreciate your work, but just wanting that original look, so please help, if you can!
Cheers and keep up the gr8 work!
[Reply]
asa Reply:
August 22nd, 2008 at 12:29 am
Don’t put a check mark and it will stay orginal.
[Reply]
Gerald Reply:
August 29th, 2008 at 11:40 am
Which check mark are you talking about? I would really like to change the logo back to the apple one.
[Reply]
Leadergo Reply:
September 3rd, 2008 at 11:20 pm
the stage in pwning where it asks you to check what you want installed on the hardware (Installer, Cydia, and Replace Boot Logo).
just keep “Replace Boot Logo” unchecked.
14. Baadshah August 21st, 2008, 10:16 am
this new quickpwn sucks, we want the real pwnage tool, so we can change bootlogo from that crap pinapple to apple and make custom firmware.
[Reply]
A.T Reply:
August 23rd, 2008 at 9:23 pm
well don’t use the software idiot.
it has the option to choose custom logos or not.
[Reply]
15. John August 21st, 2008, 10:22 am
if i already use a custom firmware to unlock my 2g phone, i can upgrade to 2.0.2 using itunes and my phone remains unlock? so i can use quickpwn just to jailbreak?
[Reply]
Leadergo Reply:
September 3rd, 2008 at 11:22 pm
you cant jailbreak twice (well u can, but you’ll f*** up your iphone).
best thing to do is backup your iphone to itunes (approx. 1 hour), restore the iphone, jailbreak/unlock, and re-sync iphone with backed up data… in that order.
[Reply]
16. antoin butler August 21st, 2008, 10:57 am
if your phone is already pwnage, can i use this program? if so, will it erase all my other programs that i have on here? or it will simply upgrade.
[Reply]
Leadergo Reply:
September 3rd, 2008 at 11:08 pm
no because the original pwning program is different from quickpwn and can cause your iphone/ipod to crash at start. preferably best to backup your iphone/ipod on iTunes, then restore the iphone/ipod. then try pwning it with quickpwn and sync backed up storage onto your iphone/ipod.
[Reply]
17. ICG August 21st, 2008, 11:09 am
I have a 2G iPhone with FW1.1.4 and its unlocked, I used ZiPhone.
Now I would like to update to FW 2.0.1 or 2.0.2 using QuickPwn but need to unlock since iPhone is not supported in my country.
I have read that QuickPwn does not unlock 3G iPhones, but I have not found anything about 2G’s.
If I used QuickPwn would my 2G iPhone will remain unlocked?
[Reply]
18. Mike August 21st, 2008, 11:27 am
My youtube got problem and i cant ifnd any youtube fix or activator in cydia, is there any solution to 2.01 or 2.02 youtube problem?problem is you need to connect to itunes with internet bla bla
[Reply]
19. Terry August 21st, 2008, 11:39 am
Big Boss,
After using QuickPwn to upgrade to 2.02 My youtube application will not activate as it indicates that I need to need to connect iTunes with internet..
I can’t find any youtube fix’s or youtube activator in Cydia. Please help….
[Reply]
20. since1984 August 21st, 2008, 11:44 am
This is great, simple and easy. Pretty much like ziphone works.
[Reply]
21. pepe August 21st, 2008, 11:54 am
installer is screwed up… not showing new apps after quickpwn 2.02… is there anyway to fix it??
[Reply]
22. me August 21st, 2008, 12:10 pm
how is pwning with quickpwn 2.0.2 different from the previous way of upgrading to 2.0.2 normal via itunes and then pwning that with quickpwn 2.0.1 and the 2.0.1 firmware?
[Reply]
23. Mab August 21st, 2008, 12:56 pm
I have an Ipod Touch…will quickpwn 2.0.2 work to jailbreak it? I bought into the 2.0.2 upgrade from Itunes.
[Reply]
24. red56 August 21st, 2008, 1:09 pm
i jailbroke and unlocked 2.0.2 by doing the following… i connected my iphone to itunes and downloaded the new frimware directly from them , doing a restore/update , than i loaded up quickpwn and applied the 2.0.1 restore to my phone which took approx. 3mins , once this was complete my phone was jailbroken but still not unlocked… i went into cydia and downloaded the app bootneuter , than applied the settings version 3.9 , neuter - on , unlock - on .. restated the pohne boom.. unlocked and jailbroken
.and just if anyone ask’s so i dont need to reply to 1000 post’s i updated my iphone 2g from version 1.14 straight to 2.0.2 via itunes than applied the 2.0.1 restore ( not the custome one from this site the regular version off this site) than applied bootneuter via wifi directly on my phone - current version 2.0.2(5c1)
[Reply]
25. Kenny August 21st, 2008, 1:21 pm
i have a 2.0.1 jailbroken ipod touch
wat steps do i have to take to get to a 2.0.2 jailbroken ipod touch ??????
[Reply]
26. Baadshah August 21st, 2008, 1:22 pm
i feel dev-team are mad this time, whats so difficult, cant they just give us a custom firmware so we can easily jailbreak and unlock ou iphones.
[Reply]
diddy Reply:
August 24th, 2008 at 9:26 pm
I find it pretty lame that people complain about not being able to change the boot logo in quickpwn and getting frustrated at the devs for not coming up with it quicker so users can get their hands on it now. want all this stuff for your iPhone? “what’s so difficult” as baadshah says, blah Figure it out for yourself, wait you don’t know how or have no resources? Shut up bite your tongue and be patient these fellas work awefully hard and put alot of time and effort just so you can do the next neatest trick to your iPhone. Quit being greedy and abnoxious. BigBoss and dev team keep it up I’m sure there’s many of us who appreciate all the time work and effort you put into these projects you guys rock
[Reply]
udornf4 Reply:
August 27th, 2008 at 3:40 pm
This “Baadshah” needs to get a life (somewhere else)
[Reply]
27. red56 August 21st, 2008, 1:31 pm
kenny follow the same steps i did , just dont unlock and insted of picking the iphone choice in quickpwn 2.0.2 pick itouch
[Reply]
28. Spinny August 21st, 2008, 1:43 pm
Dead simple, I allowed my phone to be updated with iTunes i then ran QuickPwn and used the latest Firmware 2.0.2 from this site when it asked me to browse two. The phone was still unlocked all my apps were still there all i needed to do was reload some apps from Cydia. The phone was still unlocked, Jail broken and no problems.
[Reply]
29. Spinny August 21st, 2008, 1:45 pm
by the way all my apps are cracked not bought from App Store and all run perfectly after modifying the MobileInstallation file and its permissions. I upgraded from 2.01 to 2.02 with no issues.
[Reply]
30. red56 August 21st, 2008, 1:59 pm
nice so you just loaded 2.0.2 from this site insted of 2.0.1 i think either or works fine than , pretty simple i dont see why people are having such a hard time
[Reply]
31. Spinny August 21st, 2008, 2:05 pm
Yeah just downloaded 2.02 from here and i know as long as u follow the instructions your phone will be ok. If its unlocked it will stay unlocked, just don’t panic let QuickPwn do its job then you will see Cydia and Installer on ur phone/itouch no problem it rocks!
[Reply]
32. mmick August 21st, 2008, 2:06 pm
@Spinny
and others:
After updating thru iTunes + quickpwn, does *everything* works well? (Youtube, Appstore, cracked apps, etc)
[Reply]
33. Spinny August 21st, 2008, 2:09 pm
everything works for me Mmick just like before. Got loads of cracked apps and they run, WIFI perfect “everything” mate as Nike say …just do it
[Reply]
34. mmick August 21st, 2008, 2:14 pm
Thanks for your quick answer ;)
[Reply]
Spinny Reply:
August 21st, 2008 at 2:19 pm
no worries mate take the plunge go for it!
[Reply]
35. red56 August 21st, 2008, 2:15 pm
mmick i had to use itunes becuase my phone got messed from going from 1.14 to 2.0.2 so i needed to a restore through them on itunes , i had to crack youtube again
[Reply]
36. red56 August 21st, 2008, 2:16 pm
spinnys way is best if your phone is working fine before you load 2.0.2
[Reply]
37. red56 August 21st, 2008, 2:38 pm
spinny , do you use bootneuter , i dont really understand the program fully.. i just know it works?
[Reply]
38. P.inVan August 21st, 2008, 2:39 pm
BigBoss, was wondering if you could clear up something for me. The dev team’s post states that this version of Quickpwn also *activates*, but you warn that it doesn’t. I’d like to know which one it is? Obviously, this has a great effect on iPhones being used on their official carriers.
[Reply]
mmick Reply:
August 21st, 2008 at 2:42 pm
I read too that this doesn´t “activate” the iPhone.
1) I don´t understand what “activation” is
2) My iPhone has a 2.0.1 “activated” (at least I was told it was)
3) If I update with iTunes 2.0.2 and then go with Quickpwn + 2.0.2 will it stay/get “activated?”
sorry for these questions :)
[Reply]
39. red56 August 21st, 2008, 2:48 pm
mmick i believe spinny just updated through quickpwn to 2.0.2 i had to use itunes becuase my iphone was bricked.. which was a long process to get everything back
[Reply]
40. SoS August 21st, 2008, 2:49 pm
I seem to have a general problem with my PC.
I tried to pwn my 3g with winpwn. Didn’t work. After putting the phone into DFU mode iTunes doesn’t recognize it anymore. Tried countless times, all USB Ports. At first I thought I was too stupid to get into DFU mode, but I can see in the device mgr, that the phone is in DFU. Now I tried with Quickpwn and the command line part simply cancels after the countdowns. Are there any windows services that have to be running? I run XP SP 3. Latest iTunes.I already tried to delete/deinstall iTunes and Quicktime completely, but it didn’t work. Funny thing is that the regular updates with iTunes also don’t work as designed. I always get an error while updating and have to restore. Any ideas?
[Reply]
SoS Reply:
August 23rd, 2008 at 9:41 am
I’d really be happy for suggestions! I don’t have another PC available to test on.
[Reply]
41. roberto August 21st, 2008, 2:57 pm
so.. this installs cydia if i restored to 2.0.2 ? (or if my iphone came with it, wich may happen if i get to buy a 3g one tomorow, official carrier obviusly )
[Reply]
42. johnnie August 21st, 2008, 3:07 pm
Hey bigboss.
if i use the quickpwn will it automatically change my boot image from apple to pineapple?
Please let me know if i can use quickpwn with out changing the boot logo.
thank you
[Reply]
43. Mab August 21st, 2008, 3:14 pm
I see firmware for the 2.0.2 vs for 3g and 2g iPhones, but am unsure of what firmware to select for my 2.0.2 8g iTouch (trying to quickpwn).
[Reply]
44. Mab August 21st, 2008, 3:53 pm
Maybe I should mention I am not using a MAC? Are the firmware files the same for a PC?
[Reply]
45. chris August 21st, 2008, 4:21 pm
I’m a Mac user trying to figure this out on Paralels. I’m lost.
I have a 3G running 2.0.2.
I have downloaded the IPSW software and have it in a folder on my desktop.
I have downloaded the newest (for 2.0.2) QuickPwnGUI120 file and have that in the same folder.
Do I ALSO need to download a QuickPwn file for 2.0.2? All I can find is ones from a few days ago that ONLY supported 2.0.1.
Once I have all these files in a folder what do I do? If I double-click the GUI file it says it wouldn’t initialize properly.
If I double-click the iPhone 3G file it tells me that it can’t find the 2.0.1 IPSW file… because it’s not there. Which is why I think I have the wrong version of QuickPwn.
Help!
[Reply]
46. Timmy August 21st, 2008, 5:06 pm
So basically everytime a firmware upgrade comes whether you use winpwn or quickpwn you are going to have to reload all of your Cydia apps. That part kind of sucks. I guess I could back them up with sftp first. It’s kind of weird there is a Cydia app that can backup App Store apps but not Cydia apps.
[Reply]
47. Paul August 21st, 2008, 5:22 pm
This worked perfectly the first time. Thanks guys and keep up the good work.
[Reply]
48. mmick August 21st, 2008, 5:23 pm
I´ve just updated my 1st gen iPhone (2G) from 2.0.1 Jailbreaked to 2.0.2 Quickpwn:
- updated 2.0.1 -> 2.0.2 by iTunes (oficial)
- Quickpwn + 2.0.2 official, using Quickpwn instructions
Phone finished unlocked, kept everything (except cydia programs) and with Cydia/Installer.
I´m testing it
[Reply]
irshad Reply:
August 30th, 2008 at 5:30 am
i have completed the process too n everyfing is working fine just the youtube is not working when try to open it , it says need to connect to the itunes with internet n enable the youtube ………..i opened the i tunes bt couldnt find the any unlocking category or youtube activator can any1 help me wid….plz…..
[Reply]
49. Chris A August 21st, 2008, 5:25 pm
To anyone who can help. I have a fully jailbreaked iphone i jailbreaked it before 2.01 came out. I figure now is a good time to goto 2.02. 2 questions, do i need to go through itunes and update it to 2.02 before i pwn it? Or can i just use this new winpwn to do it? I’m not concerned with unlocking it, I’m already on the at&t network. Also, will i lose my contacts and all my apps?
[Reply]
Spinny Reply:
August 21st, 2008 at 5:38 pm
Chris, to get on 2.02 you have to do it through I tunes mate - read below. Then run Quickpwn to jailbreak.
[Reply]
50. Spinny August 21st, 2008, 5:36 pm
Guys look this is simple i went from 2.0.1 on a Apple iPhone ist Gen - follow this.
1. Go to the firmware page and download the official firmware
2. Open iTunes and update your phone to latest firmware. This will update phone but it won’t be jail broken but will be unlocked if it was unlocked and activated before.
3. Run QuickPwn and follow instructions it will ask to browse to ispw file you downloaded earlier browse to there.
4. Tick what you want installed, I like my apple logo so i unticked logo and i wanted Installer & Cydia.
5. Let it then run through the jailbreaking, dont be scared it gets there in the end.
6. The phone will boot up and there you have Installer, Cydia and the Appstore apps you had before along with contacts, sms etc all the stuff you had before except third party apps.
Hope that helps…phew
[Reply]
51. TOny August 21st, 2008, 6:08 pm
Its pretty easy i am very suprise after upgrading via itunes the phone stayed unlocked. i wish all the upgrade from macs were like that.
[Reply]
52. Big D August 21st, 2008, 6:40 pm
hey everytime i get to thepoint where it says 100% it stop the phone can not be found. what am i doing wrong
[Reply]
53. jk August 21st, 2008, 7:06 pm
Just updated to firmware 2.0.2 with iTunes and Quickpwn on my previous 2G custom firmware 2.0.1. This is what I did:
1.Update firmware 2.0.2 from iTunes, click “check for up Update” in iTunes.
2.After firmware 2.0.2 is updated on your iPhone and make sure everything is there and working. Cydia and Installer will not be there, but all others apps and settings and unlocked remain.
3.Fire up Quickpwn and select custom 2.0.1 firmware when prompt and follow the instruction in the DOS box. when finished your firmware 2.0.2 is jailbroken and cydia and Installer is back; everything else work just fine.
[Reply]
54. some guy August 21st, 2008, 11:47 pm
the “ipod fading slideshow wallpapers” springboard theme broken for anyone else after the 2.0.2 pwn? just showing a question mark for me.
[Reply]
55. asa August 22nd, 2008, 12:33 am
They big question I have is…is it worth it to upgrade to 2.02 since many people are reporting so many problems like signal drop ect. ect. How about for those that have upgraded on the 2g…any problems to report or enhances???
Thanks!
[Reply]
jk Reply:
August 22nd, 2008 at 11:21 am
See the reply to Gabe below!
[Reply]
56. Paul s August 22nd, 2008, 1:41 am
Hi all,
I am trying to start the QuickPwnGui120 program and I keep getting QuickPwnGui120 has stopped working. The directory structure is as such
program is located in
C:\quickpwn
C:\quickpwn\PwnmetheusBundles <– Dir
C:\quickpwn\Cydia.tar.gz
C:\quickpwn\iPhone1,1_2.0.2_5C1_Restore.ipsw
C:\quickpwn\iPhone1,2_2.0.1_5B108_Restore.ipsw
C:\quickpwn\iPhone 2G.bat
C:\quickpwn\iPhone 3G.bat
C:\quickpwn\iPod touch.bat
C:\quickpwn\quickpwn.exe
C:\quickpwn\quickpwn.img3
C:\quickpwn\QuickPwn-Bundle-Release.exe
C:\quickpwn\QuickPwnGui120.exe
C:\quickpwn\rd.tar
My box is as follows
amd Phenom 9500 quad-core
4 gigs of ram
Vista Ultimate 64 bit
Any help?
[Reply]
57. Gabe August 22nd, 2008, 2:37 am
So, this means that I’ll lose all my customization, phone numbers, and info on my 2.0.1 phone if I were to upgrade to 2.0.2 firmware then quickpwn? There’s no way I can back this up, like for example using the itunes backing up feature?
[Reply]
jk Reply:
August 22nd, 2008 at 11:18 am
Gabe,
Upgrade to 2.0.2 from 2.0.1 on 2G iPhone will not lose your settings or unlocked, only third party apps will need to reinstall.
I upgraded my yesterday, hardly notice anything changed, but thrid party apps seems to more stable, signal strength not improve.
[Reply]
58. Annie August 22nd, 2008, 8:14 am
Hi, just trying to establish what this acctually does? so I have a 1.1.4 unlocked activated jailbroken iphone and if I used this for my iphone and added the 2.0 firmware from my pc at some point in the process it would upgade my iphone? I may have the idea of this totally wrong. I dont understand the pwnage n winpwn it’s all so confusing, I’m used to a sidekick3… any help would be much appreciated, many thanks…
[Reply]
59. nazz August 22nd, 2008, 8:23 am
After using QuickPwn to upgrade to 2.02 My youtube application will not activate as it indicates that I need to need to connect iTunes with internet..
I can’t find any youtube fix’s or youtube activator in Cydia. Please help….
[Reply]
60. mmick August 22nd, 2008, 9:45 am
My QuickPWN 2.0.2 also does not activate YOUTUBE!!! :( :( :( Everything else works fine.
[Reply]
mmick Reply:
August 22nd, 2008 at 11:46 am
*** Found the Solution ***
- on Cydia: youtube activator
- if doesn´t work:
http://rapidshare.com/files/138902840/Archive.zip.html
- SSH to /private/var/root/Library/Lockdown/
- permitions 0644
- delete folder “pair_records”
- REBOOT
ready to go :)
[Reply]
61. pepe August 22nd, 2008, 11:25 am
for youtube fix.. download winpwn 2.0.0.4 and extract the files of youtubeactivator.tar found in the installation folder… then u have to replace the files by SSH…
http://www.hackint0sh.org/forum/showthread.php?t=49993
[Reply]
62. brian August 22nd, 2008, 12:52 pm
I already did the Jailbreak to 2.0.1 on my 3g and was thinking of upgrading to the latest 2.0.2 software. What is the easiest way to upgrade software without losing all my Cydia apps?
[Reply]
mmick Reply:
August 22nd, 2008 at 1:11 pm
AFAIK none… 2.0.2 is really faster :)
[Reply]
63. Phil1976 August 22nd, 2008, 1:54 pm
I´ve a jailbreaked 3G with 2.0.1, i try to update with iTunes to 2.0.2 but i only get a failure message “iTunes konne “^0″ nicht synchronisieren”
The only way to update was a complete restore and loose all of my settings
[Reply]
64. Big D August 23rd, 2008, 12:03 am
my phone is not coming up on my computer. i get all the way to performing operation 0 100% done and than nothing please help
[Reply]
65. SummyD August 23rd, 2008, 2:25 am
Unfortunately i didnt get to see this website before i did the upgrade to 2.0.2 from 1.1.4 on an unlocked iphone bought in Dubai! Now i am in a rut and i know that i was sposed 2 pwn before after readin all you guys had to say but does any know what i can do now?? My phone cant go past the emergency call bottons n itunes wont recognise without sim(which i dont have, I am in south africa) or carrier! Plz help!!!
[Reply]
66. getfamous August 23rd, 2008, 4:12 am
just one little question …. when will be the MAC version of PwnageTool (2.0.3) to update the firmware to 2.0.2 ???
[Reply]
67. plceli August 23rd, 2008, 7:37 am
everything went well during the process of updating through iTunes and then pwning 2.0.2 but YOUTUBE is NOT activated. I can’t find any activator cydia or installer. How could I activate??!
Thanks
[Reply]
plceli Reply:
August 23rd, 2008 at 10:32 am
Ok I found a way to activate YoutTube:
http://www.hackint0sh.org/forum/showthread.php?t=49993
[Reply]
68. Andrew August 23rd, 2008, 9:57 am
I used iTunes to update and then quickpwn’d my phone. All is working well. I used Cydia to reinstall openssh and then took a look on my phone. All my cydia apps are still on the phone in the applications folder but none show up on my springboard. What do I do to make them reappear? Do I have any options over reinstalling? I don’t want to lose settings if I don’t need to.
[Reply]
Andrew Reply:
August 23rd, 2008 at 10:07 am
Nevermind. I figured out why there were “listed” there. WinSCP was using a cache file for some reason and even the times I had hit refresh did not truely refresh the folder contents.
[Reply]
69. sippi101 August 23rd, 2008, 4:05 pm
When using quickpwn everything goes fine until it reaches processing operations 0. 100% then my ipod reconnects then disconnects don’t know what is happening?
[Reply]
70. Anonymous August 23rd, 2008, 4:25 pm
youre directions suck they are not thorough at all.
[Reply]
71. JAY ACUZAR August 23rd, 2008, 5:18 pm
HEY GUYS THIS IS WHAT I DID… I STARTED WITH A 2G 2.0.1 PWNED BY WINPWN 2.0.0.4 ON T-MOBILE…. WHAT I DID IS JUST OPENED ITUNES CLICKED UPDATE TO 2.0.2 AND MY PHONE UPGDRADED AND REMAINED UNLOCKED AND ACTIVATED… I LOST CYDIA AND INSTALLER SO WHAT I DID IS I OPENED QUICKPWN GUI LATEST VERSION THEN I RAN IT USING THE 2.0.2 FIRMWARE… THEN MADE ID TO ITS JOB AND THERE!! UNLCOKED JAILBROKEN 2.0.2 IPHONE 2G WITH CYDIA AND INSTALLER IN IT
[Reply]
72. Rush August 23rd, 2008, 7:24 pm
PWNING does not work for me. I have followed the directions and it STILL does not work. I have an iPhone 3G and would like some help with this thing please.
[Reply]
Rush Reply:
August 23rd, 2008 at 7:35 pm
ALL IT SAYS IS PERFORMING OPERATION 0, 100% DONE AND IT JUST SITS THERE. I NEED HELP GUYS….PLEASE!!!!!!
[Reply]
Rush Reply:
August 23rd, 2008 at 7:55 pm
SOLVED!! IF ANY OF YOU ARE HAVING THE SAME ISSUE AS ME, GO BACK TO STEP 8 AND UNPLUG YOUR IPHONE AND RE-PLUG IT INTO THE COMPUTER AND THAT SHOULD STAR THINGS FOR YOU!
[Reply]
73. RanM August 24th, 2008, 10:05 am
Does quickpwn change the root partition size? on my Jailbroken 2G phone I have a root partition of 300MB. It is my understanding that it should be over 500MB (at least). Should I use quickpwn or winpwn???
[Reply]
74. Mike August 25th, 2008, 9:51 am
Would someone answer my question please?
1) I am running 2.0.1 on my jailbreaked 3g iphone. Should I update the software to 2.0.2 thorugh iTone before using quickpwn 2.0.2?
2) Will I loose all of my apps that I downloaded though cydia?
3) How can I back up all of my third party apps that I downloaded through cydia in case if I lost them…
Thanks,
Mike
[Reply]
Tuck Reply:
August 25th, 2008 at 11:46 am
1. Yes…you must update to 2.02 via itunes FIRST. Then you can run quickpwn
2. Yes, you will lose all of your 3rd party apps through cydia. You will not, however, lose any apps from the appstore or settings.
3. There is no way to back up your 3rd party apps through cydia (at least not that I know of)
[Reply]
75. Leon August 25th, 2008, 2:35 pm
hi guys, i’ve upgraded to 2.0.2 via itunes (used to have 2.0.1 jailbroken) and then jailbroke it via quickpwn. everything works well, except bossprefs (which i’ve now [re]installed via cydia) isn’t showing up on the springboard. please help. i’m assuming it’s hidden. how do i unhide it?
[Reply]
76. kay August 26th, 2008, 1:45 am
.
[Reply]
77. none August 26th, 2008, 2:11 am
2.0.2 Jailbroken unlocked 2g iphone NOT 3g
Jailbroken=jailbroken from itunes
unlocked=Unlocked from At$t
1. Upgrade to 2.0.2 from itunes
(this will remove cydia)
2. Use 2.0.2 firmware for with quickpwngui120. I only installed cydia.
(it will stop at jailbreaking phone just ignore, close and goto next step obviously once your phone has booted up unless u like want a new ibrick)
3. Use cydia to install bootneuter (I selected 3.9,neuter on, fakeblank off, unlock on flash & wait for it to complete)
4. Reset Iphone
5. Enjoy ;) If I have something wrong lick my ballz im just saying what worked for me so fuq off use at your own risk
[Reply]
BigBoss Reply:
August 26th, 2008 at 2:15 pm
This, unfortunately, will not activate your phone. Both unlock + activation are required for proper operation. As soon as you insert a tmobile sim or such, you will get “sim changed, connect to iTunes”. You will see a tmobile connection, however, but you will not be able to use it.
[Reply]
78. mike August 27th, 2008, 12:38 am
wtf is bootlaoders v.3.9 and v.4.6?
[Reply]
79. mike August 27th, 2008, 8:22 pm
my iphone didnt unlock with the quickpwn thing… it keeps saying different simdetected please connect to itunes. anyone has a solution?
[Reply]
80. mike August 27th, 2008, 8:29 pm
helpp!!!!
[Reply]
81. Marcus August 27th, 2008, 9:38 pm
hello there … i have upgraded from fw 2.0.1 to 2.0.2 it worked perfectly exept for i have no signal what so ever .. what should i do i have iphone 2g
thanks
[Reply]
82. siddhanth September 4th, 2008, 6:01 am
hi
i have already used winpwn to pwn my iphone and already jailbroken my iphone and upgraded to2.0.2 but i am having a problem of downloading third party applications some times it stucks and show only the apple symbol
can you send me the links from where can i download quickpwn for 2.1.1 firmware jailbreak
[Reply]
83. 2.0.2 Activator September 4th, 2008, 5:16 pm
Does anybody have the definitive answer to this:
My iPhone 2G was jailbroken and unlocked on 1.1.4.
I updated to 2.0.2 in iTunes used QuickPwnRC3 to jailbreak it. I selected to unlock phone and entered the correct bootloader files. Everything appeared to go well.
Now, I’m just getting the ‘Emergency Calls’ slider and although it’s unlocked it’s not activated and wants to connect to iTunes - Why is this?
How can I rectify this?
[Reply]
84. maz4e September 5th, 2008, 4:54 pm
Had the same problem. After quickpwin iPhone was no longer activated, but jailbrake and unlock were sucessfull. Used winpwn 2.5.02 to jailbrake, unlock and activate Iphone 2G. Ispw succesfully created. Restore in DFU modus delivered 1602 error. Normal restore via iTunes was successfull with customized ipsw. Pls try
[Reply]
85. m55 September 6th, 2008, 7:30 pm
hi, I upgraded my 2g iPhone from 1.1.4 to 2.0.2 and ran QuickPwn and now have no service, is there a fix for this?
Thanks
[Reply]
Alano Reply:
September 10th, 2008 at 5:12 am
Go to Cydia; use search to find BootNeuter.
Install it. Follow instructions.
Exit Cydia.
Disable auto-lock (set it to never in settings). Start BootNeuter from desktop (start screen).
Run it, follow instructions and you are done (after a reset or two). Reset after upgrade is done.
It will fix YouTube too.
Alano
[Reply]
86. qwertyuiop1037 September 20th, 2008, 1:46 pm
ok so im experiencing an error after i select the firmware version–basically step 3 in the quickpwn process. After i select the correct firmware (2.1 for first gen iPod Touch) quickpwn recognizes it and i click the arrow for the next step. Once i click the error the Windows error Reporter opens and tell me that quickpwn.exe has experienced an error and needs to close. It happens every time and with every version of quickpwn that ive found so what should i do?
[Reply]
87. LITO -KUWAIT September 27th, 2008, 2:34 pm
HELP!!!, I Have Iphone 2G, it was 2.1 iphone version, working fine. but i decided to downgrade to iphone 2.0.2 using Itunes 7.7, it process ok. after that i run quickpwn QuickPwnGui120.exe, after that it boot the iphone but it get stock on Pineapple Logo only!!!, Help!!! any suggestion. i tried many times to connect to itunes or quickpwwn again. but the iphone is not recognized anymore. i need this to work bec. this is the only one i’m using thanks…Bigboss any help!!!thanks in advance
[Reply]
88. LITO -KUWAIT October 1st, 2008, 4:39 pm
THANKS FOR ALL YOUR HELP… I GOT MY IPHONE RECONNIZED NOW IN ITUNES V8. I CAN SYNCRONIZED NOW ALL OF MY MUSIC , PHOTO, MOVIE..
IF YOU WANT ANY HELP.. JUST SENT EMAIL TO ME..HOW I DID IT.:-)
[Reply]
89. blimblim04 October 7th, 2008, 3:07 pm
hi i need some help , i have the iphone 3g jailbroken with cydia and installer on it, can somebody tell me how can i put, winterboard+customization,snapture,boss prefs, cycorder and categories. many thanks
[Reply]
90. blimblim04 October 7th, 2008, 3:08 pm
ohh i forgot to mentioned 2.1 firmware. thanks
[Reply]
91. Chris Anderson October 10th, 2008, 5:32 am
We have have the iPhone 3G 8GB,3G 16GB,4GB,8GB,16GB in stock for sale at affordable prices.
iPhone 3G 8GB Cost…..US$400
iPhone 3G 16GB Cost….US$450
iPhone 4GB Cost……..US$250
iPhone 8GB Cost……..US$300
iPhone 16GB Cost…….US$350
HTC PHONES:
******************************
HTC Advantage X7510…..US$950
HTC P3470……………US$500
HTC Touch Cruise……..US$540
HTC Dual…………….US$400
HTC S730…………….US$410
HTC P6500……………US$780
HTC TyTN II………….US$440
HTC Touch……………US$950
HTC S630…………….US$360
HTC S710…………….US$350
HTC P3600i…………..US$460
HTC Advantage X7500…..US$980
HTC MTeor……………US$200
HTC touch diamond…….US$550
HTC Shift……………US$1,250
Nokia N90……..US$200
Nokia N91……..US$220
Nokia N92……..US$230
Nokia N93……..US$260
Nokia N93i…….US$300
Nokia N95……..US$350
Nokia N70……..US$170
Nokia N71……..US$180
Nokia N73……..US$200
Nokia N74……..US$230
Nokia N76……..US$240
Nokia N77……..US$260
Nokia N80……..US$260
They are Brand New/Unlocked to all networking Systems and would function with any network world wide,and also comes with all its Accessories and Manuals.
Contact us Via: legendmobilestores@yahoo.com
[Reply]
92. Matthew October 25th, 2008, 5:51 pm
I downloaded QuickPWN on my iPod. But whenever i boot up my ipod the apple icon displays. My computer says it connected but then my iPod immediately flashes and restarts, and my computer says its not connected. It is a continuous string of restarts. What do I do?
[Reply]